Giỏ hàng của bạn trống!
0 sản phẩm
RGB Color Sensor, Digital Color/Mark Detection Type
Thanks to a built-in RGB 3-color light source and because the optimum light source is automatically selected to match the base and mark color, there is no need to change the sensor depending on the color. Additionally, since the light source most easily contrasted is automatically selected, mark detection can easily be performed even under difficult conditions as in the diagram below.
Simple settings and fine adjustments are possible. Thanks to the teaching method, setting is possible by simply pressing a button. There are also buttons for manual adjustments, making it possible to configure sensitivity settings to the desired level while viewing the digital display.
Up to 8 settings can be recalled with the built-in bank switching function. Eliminates time wasted when changing setup of multi-product lines. Of course, external recall is also possible.
Built-in color mode for color detection. Only the colors set can be distinguished. 3 colors (red, green, blue) are always emitted and the ratio thereof is calculated, making it tolerant to workpiece variation. Depending on the object to be detected, mark mode and color mode can be selected with 1 sensor.
|THÔNG SỐ CƠ BẢN|
|Tín hiệu đầu ra||NPN/PNP|
|Voltage||10 to 30VDC|
|Spot size||1x6 mm at 18mm|
|Thời gian phản hồi||RGB Color Mode: 800µs, 1600µs, 4000µs. Mark Sensing: 250µs, 500µs, 1200µs|
|Khoảng cách phát hiện||18mm ±2mm|